Top>Models Specifications>KIT-series>KIT20/40
- Transfer processing maintains the same productivity as progressive processing. This is useful to improve the yield and roundness, and to minimize the slug flaws.
KIT20
KIT40Ⅱ
KIT20
| Press | KIT20 | KIT40 | KIT40Ⅱ | ||||
| Capacity | kN | 200 | 400 | ||||
| StrokeLength | mm | 30 | 50 | 30 | 50 | 30 | 80 |
| max.Strokes/ minutesmax |
SPM | 400 | 300 | 350 | 250 | 300 | 200 |
| Die height | mm | 240 | 330 | ||||
| SlideAdjustment | mm | 0 | |||||
| SlideArea | mm | 400*140 | 500*180 | 650*205 | |||
| Bolster | mm | 650*285 | 700*360 | 800*450 | |||
| Effective area for die mounting (RF-FB) |
mm | 400*260 | 650*350 | ||||
| Main Motor | kW | 2.2 | 5.5 | ||||
| Transfer feed drive shaft number |
- | 3-axle/X/Y/Z | |||||
| Transfer feed supply pitch | mm | 25/32/40/50 | 50/60/70 | ||||
| Clamping stroke | mm | 7 | 16 | ||||
| Knockout stroke | mm | 13 | 22 | ||||
| Weight | ton | 2 | 6 | ||||
| PaintColor (Body) | - | Japan Paint Manufactures Association A25-75B | |||||
| PaintColor (Slide) | - | Japan Paint Manufactures Association A22-50B | |||||
| Standard accesories |
Air clutch & brake |
| Jamming remover | |
| Automatic lubrication system | |
| Arrangement for stopping at a fixed point |
|
| Digital speed meter | |
| Digital angle indicator | |
| Control box with touch panel | |
| Production counter (8-digit) (Built-in display) |
|
| Preset counter (8-digit) (Built-in display) |
|
| Power outlets(100V/200 V one each) | |
| Material end detecting switch (Proximity) |
|
| Connectors for-Mis grip (Sudden stop 6/24VDC) |
|
| Miss feed detection connector (Sudden stop1/24VDC) |
|
| Tension lock connector (Sudden stop1/24VDC) |
|
| Drip type punching oil supplier with 2-liter tank |
|
| Front safe door | |
| Air gun (1set) | |
| Cushion rubber pad |
| Optional | Lubrication heat & cool equipment |
| Air ejector | |
| Air power outlets | |
| Punching oil supplier (Electric pump) |
|
| Mist type punching oil supplier | |
| Material gild equipment | |
| Die area lighting | |
| Pat light(3-color) | |
| Material guide | |
| Chute for products | |
| Chute for scraps | |
| Connectors for-Mis grip (7ch and above) |
|
| Painting by designated color |
